This is more or less the same thing, only it's a star and instead of slicing it up I've cut out smaller star shapes, which spin within each other.
Here's a picture (it's a prototype)
|Cardboard wasn't the best material to spray with paint.|
The problem was that the cardboard soaked up the paint and became very floppy, it's okay now it's dried but for a moment I thought it might fall apart.
Next time I'll use wood (maybe thin plywood) ;-)
It's easy to make, basically you find a shape, I used a star seeing as it's nearly christmas, but a circle or other shape would work just as well. You can see that it's a star within a star within a star, they all turn independently.
You cut out the shape from your chosen material, then you draw a smaller shape inside it, and then another until you get to the middle, I left a fairly large shape in the middle, if I'd have used wood I could have gone smaller.
Now you want to remove some of the sections you've drawn so that there's a gap between each shape, like the picture below (which you can copy if you want to use a star, just print it out and use it as a template) I've marked parts in red, these are the parts you want to remove, you should be left with 3 sections.
Star template -
|You may want to make it smaller, or larger. Note the red sections.|
If you use wood you will need to use a drill bit to make the holes for the thread or wire if you prefer and what you should end up with is something like the first pictures (only some what neater) I will update this post with pictures of a wooden one if I get round to making it before christmas day ;-) if not have fun making your own ones, you can get the kids to decorate them with glitter and what ever else you feel like, have fun.
Thanks for reading.